What does it do?

The picture below should help to explain this a little better.

We actually sell angle shims for most brands that can help achieve your perfect tail angle!

Every brand of foil has a different front wing angle. Some may conflict with your board design. Sometimes the foil wing angle doesn't match any board really, and this will need to be compensated for. Some people like a certain angle for Hand Winging and a different board angle for prone. Sometime boards are made with too much rocker and you can compensate for this by using mast angle shims.

In short, if your board feels like it is too nose high while pumping, or dives into the water, you may need some mast angle shims!

Our fuselages and tail adapters are pretty much all made to be able to fit any tail on the market, though some may need modification. Tails that don't need to be modified are Onofoil, Takuma, Unifoil, KD Maui tails for Takuma, Signature, and some others.

Basically any bottom flat mounted tail with 30mm hole spacing should not need to be modified.

35mm spaced tails will also fit, but may be a bit more difficult. Drilling, cutting and sanding may be required.

Well ours of course.

We are just kidding, this question is like asking what is the best bicycle. There are road bikes, mountain bikes, bmx bikes, e-bikes, and they are all amazing at what they do. Each rider is so different that it is really a personal question of where you are in your journey.

If you want a performance tail that you can grow into, or will like at an intermediate or advanced level, get a KD Foils tail. They also has a Shopify store and are not affiliated with us, but for us to not mention them would just not be in your best interest, and we are here to get you shredding.

Ok, next off, our Foilparts Fast Tail pumps great, turns great, is easy to use and is fast. We recommend it for smaller wings. The Lift 90-150 ish range is nicely paired with this tail. It will work for larger wings as well, but it matches the Lift 120 speed Nicely. 175 will probably be the biggest wing you will want to use due to the tail stall speed. Tail Suits Beginners, Intermediate, and Advanced riders.

Next is the Foilparts 16.5" Pumper Tail. Better for Beginner to Intermediate riders on bigger wings looking to pump forever. This tail will make pumping way easier and drive you forward extremely well.

The Pedigo Tail is a nice way to shorten your fuselage without buying a new one and reviews have been really good! Popular on Takuma Foils!

Does it fit your Doodads?

Yes, unless there is a part that slides into the mast itself and the No Limitz Mast does not have that feature, it will fit.